Related topics
For every item already registered (or you plan on registering) in the DC1 system you must complete (i.e. validate) the mandatory Iptor WM1 related fields on this panel.
The item must then be sent back to Iptor WM1. How this takes place is dependent on the triggers activated. You have the following options:
- Send automatically (one at a time) as soon as you have entered the data for each item if the relevant file/trigger program is activated and “created” in Work with database triggers.
- If you want more control over when to initially send the data you can perform a WMS initial load after you have entered/validated the data. This will send all data simultaneously. Note: Make sure the relevant trigger flag is not set to YES. When ready, create the relevant triggers (i.e. select the Create trigger option in the Work with database triggers routine) so that any change that may take place later on for the segment will be sent and updated in Iptor WM1.
This panel can be accessed through different programs and be displayed in different modes:
Default mode
Attribute mode
Enquiry mode
Function keys
| Inactivate/Reactivate | Inactivate or reactivate Iptor WM1 information for the selected item. |
- Item
- Displays the item code and description.
- Alter unit code
- This field is currently not used.
- Prod loc group code
- Mandatory entry. The product location group code is validated against the Product location group table from Iptor WM1. The product location group specifies several aspects about the way an item is handled, such as the put away algorithm, the picking algorithm and the replenishment algorithm. The product location group of an item is taken as a default when creating a stock product. By linking product location groups to location groups, you define where products may be stored.
- Product family code
- Optional entry. If this field is completed, it is validated against the Product family table from Iptor WM1. The product family of an item is taken as a default when creating a stock product. Product families are used to define exclusions, meaning that there should be a minimum distance (in terms of aisles, stacks and altitude) between locations with the same or another product family group.
- Labeled
- Optional entry. The value of this field is used during the picking process to determine if it is possible to scan the products or not.
Value Description EAN The item is labelled by its EAN code ITEM The item is labelled by its item code NO The item is not labelled - Replenishment type
- This field is currently not used.
- Replenishment point
- Optional entry. Denotes the trigger quantity to generate a replenishment.
- Minimum repl qty
- Optional entry. Enter the minimum replenishment quantity for a replenishment task.
- Maximum repl qty
- Optional entry. Enter the maximum replenishment quantity for a replenishment task.
- Lot life time days
- Optional entry. Enter the lot life time in days. The lot life time is useful for items for which the expiry date is important. A proposal will occur at the time of reception for the expiry date, based on the reception date and the lot life time in days.
- Production ctrl type
- Mandatory entry. The product control type code is validated against the Product control type table from Iptor WM1. This table defines the use of the keys for stock products and the use of expiry dates.
- Package nesting code
- Optional entry. If this field is completed, it is validated against the Package nesting table from Iptor WM1. This field can be used for package calculations during the picking process (depending on the package calculation algorithm). For some products, such as baskets, the volume of several items does not need to be multiplied. The nesting factor represents the percentage of the normal volume that an additional item takes; the weights of additional items are simply added.
- Package reuse code
- Optional entry. If this field is completed, it is validated against Package reuse table from Iptor WM1. This field can be used for package calculations during the picking process (depending on the package calculation algorithm). For some products, a fraction of the volume can be used to put other items in; for instance a basket can be filled with screws. The reuse percentage represents the fraction of the volume of an item that can be reused to put smaller items in, meaning that those smaller items will not consume additional volume.
- Package comp code
- Optional entry. If this field is completed, it is validated against the Package compression table from Iptor WM1. This field is currently not used for calculations.
- Container size
- Mandatory entry. The container size code is validated against the Container size table from Iptor WM1. The container size for the item is used at reception. The default value is taken from the Owner default table in Iptor WM1.
- Container type
- Mandatory entry. The container type code is validated against the Container type table from Iptor WM1. The container type for the item is used at reception time. The default value is taken from the Owner default table in Iptor WM1.
- Qty/pallet expected
- Optional entry. Enter the quantity per pallet expected for this item. This quantity is used as a default at reception time.
- Reception inv status
- Optional entry. The reception inventory status is used as a default when receiving the specified item. The value entered in this field is validated against the Inventory status table from Iptor WM1.
- Quarantine days
- This field is currently not used.
- Quarantine time
- This field is currently not used.
- Prod mtrl issue type
- This field is currently not used.
- Production issue reg
- This field is currently not used.
- Rounding qualifier
- Mandatory entry. Enter the rounding qualifier code to be used as the default. The rounding qualifier code is used when creating bill of materials or outbound order lines. The default value is taken from the Warehouse default table in Iptor WM1. Currently, only the “EXACT” value is a valid entry.
- Package type code
- Mandatory entry. The package type code is used when creating outbound order lines. The value you enter in this field is validated against the Package type table from Iptor WM1. The default value is taken from the Owner default table.
- Stacking class code
- Optional entry. If this field is completed, it has to be a valid code in the Stacking class table from Iptor WM1.
- Sample rule
- This field is currently not used.
- Sample quantity
- This field is currently not used.
- Rec instruction
- This field is currently not used.
- Picking instruction
- This field is currently not used.
Item file maintenance, Iptor WM1 information (DSR75002)
The additional optional fields on this panel are currently not used.
Function keys
- Item
- Displays the item code and description.
- Packing instruction
- This field is currently not used.
- Ship instruction
- This field is currently not used.